1. Click on the Login Button given below to go to login page. A login form as shown below will be displayed:

2. Select One of the Following Options for which you want to login:

   1. Discom: To Login for any Discom

   2. CZE: To Login for any Zone

   3. Commissionary: To Login for any Commissionary

3. Select Login Area for which you want to login after selecting the option given above.

4. Type your User Name and Password. User Name and Password is not case-sensitive.

5. Click on Submit button to Login.

6. After successful login screen as shown below is displayed. Entry is allowed at Commissionary Level only and Discom and CZE/Zone Level can view the reports only.

For Commissionary

For CZE/Zone

For Discom

7. Select Date for which you want to add record or view report.

8. When adding Record, it is must to fill the record of previous dates in sequence. Suppose you want to enter record for 3rd of the month then it is must to fill the record for 1st and 2nd to be filled first in sequence.

9. After selecting proper date click on Add Daily Average Supply of Electricity button to enter record. Click on View Report of Daily Average Supply of Electricity to view report.

10. When Add Daily Average Supply of Electricity button is clicked a screen for the selected date is displayed which looks like as shown below. It contains name of all Districts which comes under the Commisionary for which login has been made.

11. User has to fill values for Column no. 3, 4, 5, 6, 7, 8, 12 and 13 only. Column no. 9, 10 and 11 are calculated automatically.
    Note: PLEASE WAIT EACH TIME AFTER ENTERING VALUE IN COLUMN 3, 4 & 5. ENSURE THAT AVERAGE VALUE IS DISPLAYED IN COLUMNS 9,10 & 11. KINDLY CHECK THE ENTRIES AGAIN BEFORE SUBMITTING.

12. Column No. 3, 4 and 5 will contain values for Average Electricity Supply given on date for which entry is being done.

13. Column No. 5, 6 and 7 will contain values for Availability at Transmission Substation on 33KV.

14. Column No. 12 and 13 will contain Reasons for Supplying Less Electricity than Availability at Transmission. These columns can be left blank if electric supply is not less than available at transmission.

15. Column No. 3, 4, 5, 6, 7 and 8 will contain values in Hours and Minutes. To separate Hour value from Minute value use . (DOT) as Separator. For example to fill 15 Hours and 45 Minutes type 15.45

16. To Save data click on Submit Form button.